Summer Starts Here - Save up to 70%
Thule Roof Bike Racks Review - 2015 Chevrolet Tahoe- Video
Today on our 2015 Chevrolet Tahoe, we'll be doing a test fit of Thule Sprint. This is going to be for roof racks with T-track systems to mount your bike rack up on top of your roof rack system. As you can see, up on top of our vehicle, we have the Thule arrow blades today and I want to show you how this fits up on top of there. This will be part number TH5669. One the arrow blades, go ahead and rotate the end cap around, pulling the ends off. Next, you can either do this two ways, pulling the entire rubber strip and protective strip out, that protects that T-track from getting any dirt and debris inside, or you can trim it to fit your bike rack. Today we're going to pull it all the way out. Next, we'll take our bike rack, ensuring that the tops are loose, so that out T-tracks guides can fit into the rail like so. more
7/16/2015 5:02:02 PM
Thule Sprint Roof Bike Racks Review - 2015 Chevrolet Tahoe- Video
Today on our 2015 Chevrolet Tahoe we'll be doing a test fit of the Thule Sprint. This is going to be your rooftop-mounted bike rack for a single bike to be fork-mounted. It's going to be part number TH528. We have our bike in place so you can see what it's going to look like once you have it fully assembled and on your vehicle. Now we'll go through a few of the features and show you how it's assembled and put in place. Go ahead and move to the back here and we're going to go into the backwards order of how we would place it on. Go ahead and undo or press in the gray strap button there. more
7/6/2015 6:54:08 PM
SportRack Frame Mount Roof Mounted Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevrolet Tahoe we'll be test fitting the Sport Rack, roof mounted bike rack, Part #SR4611. With the factory roof rack system on our vehicle, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front platform, we'll bring our U-bolt around the underside of our front crossbar fitting the bolts back up through the head of our carrier. We'll secure it by placing a wing nut on each end of our U-bolt. Once we have those tightened down, we can repeat this process for the other side. Here at the rear, we'll place our plastic fitting between our bike rack and our rear crossbar. Then we'll drop our bolts through the top of the bike rack making sure that they go through the holes of the fitting then we'll secure it by tightening down a wing nut on each bolt. more
1/23/2014 11:39:29 PM
Swagman Fork Down Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevrolet Tahoe, we'll be test-fitting the Swagman Fork Down roof-mounted bike rack, Part Number S64710. With the factory roof rack system on our vehicle we'll begin our test-fit by placing our bike rack directly onto our crossbars. Here at the front platform we'll bring our U-bolt around the underside of our front crossbar, fitting the bolts back up through our front platform of the bike rack. We'll secure it by tightening down two wingnuts. We can then repeat this process for the other side of the front platform. Here at the rear of the bike rack we'll take our U-bolt and drop it through the top of our bike rack, dropping the bolts around our rear crossbar. We'll place the bolts through our black metal plate and secure it by tightening down two wingnuts. more
1/20/2014 5:29:30 PM
SportRack Roof Mounted Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevrolet Tahoe, we'll be test fitting the SportRack Roof-Mounted Bike rack, part number SR4622. With the factory roof rack system on our vehicle, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front, we'll bring our U bolt around the underside of our front crossbar, fitting the bolts back up through our front platform. We'll secure it by tightening down tube and nuts. Then, we can move to the other side of the front platform of our bike rack and repeat this process. At the rear, we'll take our bolts and drop them through the top of our bike rack. Then, we'll place our plastic fitting in between the bike rack and the rear crossbar. Then, on the underside of our rear crossbar, we can install the rubber-coated clamp, making sure that the bolts go through the holes. more
1/20/2014 11:59:55 AM
Kuat TRIO Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today, on our 2013 Chevrolet Tahoe, we'll be test-fitting the Kuat Trio Roof-Mounted Bike Rack, part number RU01. With the factory roof rack system on our vehicle, we'll begin our test-fit by placing our bike rack directly onto our cross bars. Here at the front, we'll bring our U-bolt around the underside of our cross bar fitting the bolts back up through our front platform. We'll secure it in place by tightening down the two cylinder nuts. We'll then repeat this process for the other U-bolt at the front of our platform. Then, we'll use the included Allen tool to tighten down each cylinder nut. more
1/7/2014 4:06:09 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number y02098. Now to begin our test fit well place the carrier onto the vehicles crossbars. Well bring the front bracket around the front crossbar and insert the t-bolt through the underside of the bracket and tighten down the wing nut to secure the front of the carrier to the vehicle. We will then move to the rear of the carrier where we will bring that bracket around the underside of the rear crossbar, insert the t-bolt, and turn the black wing nut to tighten the rear of the carrier to vehicles crossbars. Now with the carrier secured to the vehicle, were ready to load our bike. Well loosen up the skewer as well as the rear tray strap. more
5/28/2013 4:57:29 PM
Thule Domestique Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Thule Domestique roof-mounted bike carrier, part number TH513. Now, to begin our test fit well place the carrier onto the vehicles crossbars. We will remove the skewer to expose the two front Allen bolts. Well loosen up the Allen bolts to bring the front bracket around the front crossbar. Well then tighten it down to secure the front of the carrier to the front crossbar. We will then move to the rear of the carrier where we will loosen up those Allen bolts to bring that bracket around the underside of the rear crossbar and tighten it down to secure the carrier to the vehicle. more
5/28/2013 4:51:54 PM
RockyMounts TieRod Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the RockyMounts TieRod roof-mounted bike carrier, part number RKY1014. To begin our test fit, well place the carrier onto the vehicles crossbars. We will remove the front black plastic cap to bring the rubber coated steel straps around the front crossbar. Well then move to the rear of the carrier where we will loosen up the Allen bolts to bring the bracket around the underside of the crossbar. Well then move back up to the front of the carrier where we will hook the straps into position and use the Allen wrench to tighten up the straps that secure the front of the carrier to the front crossbar. Well then move to the rear of the carrier where we will tighten up the Allen bolts securing that bracket to the rear crossbar. more
5/28/2013 4:46:23 PM
Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe will be test fitting the Yakima FrontLoader Roof Mount and Bike Carrier, part number Y02103. To begin our test fit well place the carrier on to the vehicles crossbars. Well loosen up the black T-handle on the front of the carrier to bring the clause around the front crossbar. Well then tighten it down to secure the front of the carrier to the front crossbar. Well then move to the rear of the carrier where we will loosen up the black T-handle to bring the bracket around the underside of the rear crossbar. Well then insert the T-bolt and turn the black T-handle to tighten down the bracket to secure it to the rear crossbar. Now, the carrier secure to the vehicle were ready to load our bike. more
5/21/2013 1:32:09 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe, we'll be test fitting our RockyMounts TieRod Stretch Roof Mounted Bike Carrier, part number RKY1011. To begin our test fit, we'll place the carrier onto the vehicle's crossbars. We will remove the front black plastic cap to bring the rubber coated steel straps around the front crossbar. We'll then move to the rear of the carrier where we will loosen up the Allen bolts to bring that bracket around the rear crossbar. We'll then tighten on those Allen bolts to secure the rear of the carrier to the vehicle. We'll then move back up to the front of the carrier where we will tighten down the rubber coated steel strap to the front crossbar. more
5/20/2013 3:58:12 PM
Filter Videos
Filter Videos
